Just an interim stage in the assembly. As posted in Stainless Steel Screws I change a lot of OEM screws to stainless ones. The screws of the lego swingarm should only be removed when the rear axle is NOT tighten!
Related posts:
These are the tools:
- 1/4 HEX
- torque wrench
- anti seize
Terms and conditions: All work at own risk, NO warranty in ANY case of damage!
STEP 1
Just unscrew all four screws of the swingarm.
STEP 2
Insert new screws but install the three “AA0508.2CZB” loose. First is to toque the 1/4 HEX “AA0520.2CXZB” to 33,9-36,6 NM – then the others.
Note: Just apply some anti seize because of stainless steel in alumnium.
Now for the drive pulley in the next part.
-LeMarque