A short introduction to another xborg built – sprocket locking tool.

Originally you need the HD “sprocket holding tool” (B-43982) and “sprocket locking tool” (B-45659) to remove and install the front sprocket. Very expensive…
Therefore the xborg community crafted another fine workaround-tool which is easy to recreate… but I bought one from a member =D

Basically it’s a piece of aluminium (80x15x15) with a HEX screw, turned to 12,2. Centered hole is 65 to the end. The reason for the 12,2 is that you can use it withe 22 NUT from the tool kit.